MTS Series-SAS Series SAS/SATA HDD/SSD Duplicator and Sanitizer
MTS-SAS Series - 1 to 15 SAS/SATA HDD/SSD Duplicator and Sanitizer(MTS1600SAS)
U-Reach MTS-SAS series is a professional SATA/SAS HDD duplicator, specially designed for high volume duplication. Equipped with U-Reach ‘s unique multitasking technology. The MTS-SAS series Hard Drive duplicator can simultaneously copy all targets and with a high transfer speed up to 18GB per minute. We guarantee highest productivity without speed degradation, even when the number of targets increase.
The MTS-SAS series SAS/SATA Hard Drive duplicator provides four copy modes: quick copy, all partitions copy, percentage copy and whole HDD copy that all meet different duplication task requirements. NTFS, Linux (Ext2/Ext3/Ext4), FAT/FAT32 and Mac (HFS, HFSX, HFS+) are supported formats with quick copy. Quick copy mode copies data and skips blank area; this mode enhances copy speed.
In addition, the MTS-SAS series SAS/SATA HDD duplicator is equipped with different levels of secure erase functions, Quick Erase, Full Erase, DoD 5220 Erase government standards and Secure Erase, which can fulfill different levels of HDD wiping security.
- Open platform design accepts all multi-interface HDD/SSD.
- Supports both SAS & SATA interface at 18 GB *(Real performance depends on HDD’s speed)/min high transfer speed.
- Supports 2.5″, 3.5″ SATA, ZIF HDD, SSD, IDE HDD and SAS via IDE_SATA convertor (IDE to SATA adapter-TB1529 included)
- Complies with both DoD5220.22-M erase, NSA Erase and
- NIST 8008-88 Secure erase standards.
- Supports asynchronous erase.
- Log Report Management records all task details for betterproduction management.
- Supports SATA I/II/III and 4Kn HDD.
| Model | MTS800-SAS | MTS1600-SAS |
| Targets | 1-7 | 1-15 |
| Speed | 18GB/min. (300MB/sec.) *Actual performance is dependent on HDD transfer rates. | |
Specifications | Supported Formats | Copy Modes: All Partitions/Whole HDD/Percentage copies all types of formats, both known, and unknown. | |
Quick Copy: FAT16/32/64, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (Ext2/3/4). | |||
Operating Type | Stand-alone, non PC-based operation | ||
Language Support | English, Japanese | ||
LCD Display | Backlit Monochrome LCD Display | ||
LEDs | 3 LED Indicators per Port: Yellow (Power), Green (Pass), Red (Fail) | ||
Control Panel | 4 Push Buttons (▲, ▼, OK, ESC) | ||
Features | Copy Modes | Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy | |
Skip Bad-Sectors | Manually set (Bad sector) threshold range to skip during copy process | ||
Compare Function | Bit-by-bit hardware-accelerated data comparison | ||
Sanitization Modes | Quick Erase, Full Erase, DoD Erase, 7 write erase, Secure Erase, Enhance Secure Erase, and NSA Erase | ||
Special Features | PC Monitoring | Real-time status monitoring through PC | |
Log Report Management | Monitor real-time recordings and Log Reports via PC-Link | ||
Event log reports are generated through the USB port and saved to USB devices | |||
Compatibilities | OS Supported | All (Windows, Linux, and other stand-alone systems) | |
Compatible Interfaces | w/o Adapters | 1.8″/2.5″/3.5” SATA/SAS HDDs and SSDs | |
w/ Adapters | IDE, microSATA, mSATA and M.2 | ||
Advanced Formats | Supports MBR, GPT, and Advanced formats. | ||
Capacity | Embedded controller is designed to support capacities over 18TB+. Constant improvement supports latest market-available devices. | ||
Hardware Specifications | Power Supply | Selectable Voltage 115V or 230V, 50/60Hz | |
Temperature Range | Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F) Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F) | ||
Humidity Range | Working Humidity: 20% ~ 80%; Storage Humidity: 5% ~ 95% | ||
Certification | FCC, CE, RoHS | ||